Sailing and Rigging → WH01
Click to Enlarge	Click to Enlarge	Click to Enlarge
Click to Enlarge

WH01	Winch Handle Holder	$24.95	View Cart

The holder is made of 316 stainless steel and polished. With a locking winch handle, you can mount these upside down, sideways or any other way that puts the winch handles out of the way when not in use. These can also be mounted outside if need be.

Length is 5.25 width is 1.2 and the heigth is 1.1.

Featured Items
SCAD PT90™ Propane Solenoid ShutOff Timer Provides additional safety measure in case the user forgets to shut off the propane solenoid manually. $99.00	3M™ Scotchlite™ SOLAS Reflective Tape 2 inch wide- SOLD BY THE FOOT See and be seen! Sold by the foot $1.79	SCAD MLC™ Masthead Light Controller Turns ordinary anchor light into distress signal providing an important safety feature. $109.00	Coolnet Sailboat Hammock - Unique 3-point design sets up fast and stores easily If you want a really nice place to lounge or sit you need this hammock! that you can rig in a few minutes $169.99
SCAD LVA Low Voltage Monitor with Alert & Relay It's programmable! Don't let your batteries go low without warning Shuts off or turns on electrical devices automatically $79.95	Lifeline AGM Deep Cycle Marine Battery 12 Volt (Size)24 (Capacity)80 Amp Hr Charges deeper, faster and without maintenance! Will not spill or leak! $329.00	Small Soundproofing Kit - 12 tiles typical 28' boat engine compartment (1 inch X 1 foot X 1 foot tiles) New and improved with fiberglass reinforced reflective surface! You're going to love the quiet motoring! $124.52	Signal Mate 3 NM LED Anchor Light Compact and rugged Designed for many years of operation. Mounting bracket included Made in USA! $189.95